Simple Cup
In this guide, you will learn how to add dimensions to the profiles in your sketches. You will use the extrude tool to extrude in the upwards and downward direction to specific height distances. You will also use the Fillet tool.
steps
New Sketch on the bottom Plane
162kb 00:06
Use the Circle tool to create two circles, one bigger than the other, at the Origin of the sketch.
327kb 00:13
Switch to the Select tool
75kb 00:03
Select the Sketch Dimension tool by going to the Create menu then Sketch Dimension
152kb 00:06
Click on the outer circle, move your mouse into empty space, click again, type 60 and press Enter.
264kb 00:10
Click on the second circle. Set the Diameter to 55mm by typing 55 and clicking Enter.
185kb 00:07
Switch to the Select Tool
63kb 00:02
Click Finish Sketch
105kb 00:04
Click the Extrude icon in the toolbar. Click the inner circle and outer loop so they turn blue.
182kb 00:07
Drag the blue arrow down. In the panel on the right, find the Distance label and type -5mm.
268kb 00:10
Click Ok
86kb 00:03
Un-Hide the sketch in the Hierarchy by expanding the Sketches folder and clicking the eye button.
128kb 00:05
Select the Extrude tool. Click on the outer rim of the Sketch. Type 60mm in the Distance box. Click Ok.
394kb 00:15
Hide the Sketch
78kb 00:03
Select the Fillet Tool. Click on the two rim edges of the cup. Drag the blue arrow inwards until desired rounding is reached. Click Ok.
358kb 00:14
Select the Fillet tool and round the bottom edge of the cup to a larger radius of your choosing.
245kb 00:10
Go to File then Save, and choose a name for your file. Click Save to Save.
323kb 00:12